Download the H2 Smart Home app from Google Play Store or Apple App Store. Register an account following the instructions in the app.
Starter Kit
Single Product
Step 1
Step 2
Register your Starter Kit by scanning the QR code from the accompanying manual.
Step 3
Follow the instructions as shown in the app. Plug both the LAN and power cable into the gateway.
Step 4
Connect the LAN cable to your Router and plug the power cable into the power socket.
Step 5
Remove battery isolation strips from H2 Weather and H2 Open Closed sensors.
Step 6
In a few moments, the sensor values will be displayed on your H2 Smart Home app screen. Enjoy your new H2 smart home!
Step 1
If you already have an account, skip to the next step. Download the H2 Smart Home app from the Google Play or Apple store. Register your account following the instructions in the app.
Step 2
Choose the location of the new sensor or create a new location in the app to describe where the sensor will be placed. Click on “Register new device”.
NOTE: To register a sensor, you need to own a Gateway!
Step 3
Scan the QR code on the bottom of the device.
Step 4
Remove the battery isolation strips from any battery-powered sensors.
Step 5
In a few moments, the sensor’s values will be displayed on your H2 Smart Home app screen. Enjoy your new H2 smart home!